DLC Coated Carbide Micro End Mills 2Flute, Corner Rounding from China Manufacturer

DLC Coated Carbide Micro End Mills, Corner Rounding, 2Flute ES Series

Material: Carbide

Grain Size: 0.2μm

Categary: Corner Radius End Mill

Diameter: 0.2-0.8mm

Coating: DLC

Inquire Now

Category:ES Copper & Aluminium Series

Product Information

PRODUCT DETAILS

Download Specification.pdf

PRODUCT DESCRIPTION ▼

Applicable to copper and copper alloy and other non-ferrous.

● Coating material: DLC

● Friction coefficient: 0.05-0.1

● Micro hardness: 7000 HV0.05

● DLCcoating provides wear resistance improvement as well as avoid edge stress in various applications.

Suitable for a wide range of processing, especially tungsteng copper, aluminum alloys, magnesium alloy, copper alloy and titanium alloys.

The use of low coefficient of friction coating technology, to reduce the viscosity and a good wear resistance.

【76】2刃微小径圆鼻刀.jpg

Model (NO.)	Blade Diameter (D)	R-corner Radius (R)	Blade Length (L)	Neck Angle (γ Reference)	Shank Diameter (D)	Full Length (L)
ESR002-20020-04045	0.2	0.02	0.4	15°	4	45
ESR005-20020-04045	0.2	0.05	0.4	15°	4	45
ESR002-20030-04045	0.3	0.02	0.6	15°	4	45
ESR005-20030-04045	0.3	0.05	0.6	15°	4	45
ESR002-20040-04045	0.4	0.02	0.8	15°	4	45
ESR005-20040-04045		0.05				45
ESR010-20040-04045		0.1				45
ESR002-20050-04045	0.5	0.02	1.0	15°	4	45
ESR005-20050-04045		0.05				45
ESR010-20050-04045		0.1				45
ESR002-20060-04045	0.6	0.02	1.2	15°	4	45
ESR005-20060-04045		0.05				45
ESR010-20060-04045		0.1				45
ESR020-20060-04045		0.2				45
ESR002-20080-04045	0.8	0.02	1.6	15°	4	45
ESR005-20080-04045		0.05				45
ESR010-20080-04045		0.1				45
ESR020-20080-04045		0.2				45

RELEVANT INFORMATION

PROCESS & FAQ
COMPLETE SERVICE PROCESS ▼

Material Preparation >>
Roughing >>
Finishing >>
Surface Treatment >>
Quality Inspection >>
Laser Marking >>
Packing and Shipping >>

FAQ ▼
- Q: What is the difference between carbide end mills and tungsten carbide milling tools?A: Carbide end mills are made from carbide and cobalt, offering high wear resistance and speed. Tungsten carbide milling tools are specifically made from tungsten carbide, known for extreme hardness and heat resistance.
- Q: How do I choose the right milling tool?A: Consider the material you're machining, the type of milling operation (slotting, contouring, profiling), tool dimensions (diameter, length, shank size), and any specific coatings needed (e.g., TiN, TiAlN).
- Q: What are the benefits of carbide end mills over steel tools?A: Carbide end mills offer higher cutting speeds, longer tool life, better surface finishes, and greater heat resistance compared to high-speed steel tools.
- Q: How can I extend the life of my milling tools?A: 1. Choose the right tool for the job.
  2. Use recommended cutting speeds and feeds.
  3. Apply proper coolant.
  4. Inspect and replace worn tools regularly.
  5. Store tools in a dry, clean environment.
- Q: Are there specific coatings for carbide end mills?A: Yes, coatings like TiN, TiAlN, AlTiN, and DLC can improve wear resistance, reduce friction, and enhance heat resistance.
- Q: Can carbide end mills be re-sharpened?A: Yes, carbide end mills can be re-sharpened, but it's best done by professionals to maintain proper angles and cutting edges.